DieselShip's Online Content Library

Q1. Describe, with the aid of a graph, EACH of the following types of ferrous material failure, stating ONE practical example of EACH:

1. creep; (5)

2. fatigue. (5)

Q5. Describe, with the aid of a sketch, the principle of operation of a capacitance electrode level measuring transmitter. (10)

Q3.(A) Explain EACH of the following control terms

(i) Proportional action (2)

(ii) Integral action (2)

(iii) Derivative action (2)

(B) Explain why proportional, integral and derivative actions are combined in one controller (PID), stating an example where it may used. (4)

Q4. (a) describe a method of checking main transmission shaft alignment which does not involve the removal of shaft coupling bolts. (5)

(b) State why the shaft alignment should be checked when the ship is afloat in a light ship condition. (1)

(c) A shaft system is found to be excessively misaligned so as to cause serious bending of the shaft. State what effect this could have on EACH of the following:

(i) the shaft coupling bolts; (1)

(ii) the shaft bearings. (1)

(d) State, with reasons, which of the effects in part (c) would cause the most concern. (2)

Q5. Describe EACH of the following heat exchanger types, stating a suitable application for EACH type:

(a) parallel flow; (3)

(b) contra flow; (3)

(c) mixed flow. (4)

Q6. With reference to micro bacterial infestation:

(a) List the engine room systems that may be affected by this type of contamination; (2)

(b) Explain the conditions required for bacteria to evolve; (6)

(c) Describe how the presence of microbial contamination could be detected. (2)

Q7. With reference to deck machinery:

(a) sketch a line diagram showing the layout and components of a hydraulic system with a variable delivery, pressure compensated pump and accumulator, suitable for the operation of deck machinery(5)

(b) discuss the advantages of using electrically driven machinery over hydraulically driven winches and windlasses. (5)

Q8. As Chief Engineer Officer, describe the examinations that were carried out during a safety equipment survey with regard to fire safety. (10)